Data Translation DT3152-LS, Руководство по началу работы

Страница: 23 / 84

Preparing to Use the DT3152-LS
13
2
2
2
2
2
2
2
2
2
Installing the Software
To install the DT3152-LS software, perform the following procedure:
1. Insert the Imaging OMNI CD into your CD-ROM drive.
2. Click Start from the Task Bar, then click Run .
The Run dialog box appears .
3. In the Command Line edit box, enter x:\LAUNCH.EXE (where x
is the letter of your CD-ROM drive).
4. Click OK .
The Imaging OMNI CD splash screen appears.
5. Click Install Products .
6. Click Mach I Series .
7. Click Device Drivers .
8. Click DT3152LS , then click Next.
If you are using Windows NT 4.0, Windows 2000, or Windows XP, the
installation instructions are displayed. If you are using Windows 95,
Windows 98, or Windows Me, the files are copied.
9. If you are using Windows NT, Windows 2000, or Windows XP,
click
Print to print the installation instructions, or go to the next
section to install and print the DT3152-LS documentation.
10. Click Main Menu , then click Exit .