Data General AViiON 5500 Series, Установка, расширение и обслуживание

Страница: 41 / 192

Connecting the graphics monitor (AViiON 550)
2-5
014–002250–01
Monitor (rear view)
R G B
Computer Unit Rear Panel
Figure 2–3 Connecting the color monitor
IMPORTANT: Turn the ends of the BNC cables clockwise to lock them in place.
3. Plug the holes in the other end of the monitor cable into the
graphics board connector pins on the back of the computer unit.
Figure 2–3 shows the 8–bit graphics controller (base configuration).
4. Plug the female end of the monitor power cord into the ac connector
at the back of the monitor, as seen in Figure 2–3. Plug the male end
of the monitor power cord into a grounded wall ac outletl.