Data General AViiON 530 Series, Клиентская документация, Страница: 63 / 266

Starting and Stopping the Computer System
3-5
014–002091
Make sure that powerup tests complete. Once the system displays the message
Passed,
continue to the next step
.
Your console screen appears as follows:
Testing ...
0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ
Passed
If the test messages are incomplete or include an error message, refer to
Appendix C,Solving Powerup Problems and Exiting the DG/UXInstaller."
8. As long as your computer system retains its original (factory-set) default boot
path, it tries to automatically boot the DG/UXinstaller operating system
immediately after powerup testing completes. Your screen display indicates the
disk and file that your computer system is attempting to boot, as follows:
Booting sd(ncsc(),0)root:/dgux.installer –i
What happens next depends on whether you ordered a DG/UXoperating system
package. The next section describes what your system does in either case.
Your Next Step
If you ordered the DG/UXoperating system with your AViiON 530 or 4600 series
computer, the system automatically boots the DG/UXinstaller system. If you did
not
order DG/UXwith your computer unit (that is, you intend to run a different operating
system, or operate the computer as a client of another operating system server), the
automatic boot process will fail. Refer to the following instructions that are
appropriate for your specific situation.