Data General AViiON 530 Series, Клиентская документация, Страница: 231 / 266

Using the System Control Monitor
B-17
014–002091
HELP
Displays available SCM commands.
H
ELP
Description
Displays an alphabetical list of the minimal mnemonic for valid SCM commands, the
arguments each command accepts, and a brief command description.
Arguments
None
Related Messages
None
Examples
Determine valid SCM commands, their associated arguments, and what you can do
with each one.
SCM>
H
***
SCM Commands – Rev xx.xx
***
. –Display processor status
A [jp#] –Attach current job processor
B [dev([cntrl],[unit],[part])] –Boot a device
C –Continue
D –Display all registers
E address –Examine/modify memory
E register –Examine/modify (R#,CR#,FCR#)
F –View/Change System Configuration
H –Display help message
I data beg_addr end_addr –Initialize memory range
L data [beg_addr end_addr] –Locate data pattern
M count source_addr dest_addr –Move memory range
O [trace count] –Single step
P [new prompt] –Change prompt
R –Reset system
S address [trace count] –Start processor
T [address] [...] –Set breakpoint
U [breakpoint #] [...] –Delete breakpoint
V beg_addr [end_addr] –View memory range
W address data –Write to a location without read
Z –Start s–record loader
NOTE: The first command is a period; press the period key and then New Line.