Data General AViiON 530 Series, Клиентская документация, Страница: 55 / 266

Setting Up Your Computer System
014–002091
2-15
2. Align the connector pin numbers and the D-shaped connector bevels before
gently inserting the plug in the SCSI connector, as shown in Figure 2Ć13.
Connector pins
1–50
Plug (male)
SCSI 1 connector
(female)
Spring
clip
Bus terminator plug
inserted in rear panel
connector
(clips open)
Spring clip
Figure 2-13 Installing the SCSI Bus Terminator Plug
3. Push the spring clips attached to the SCSI connector straight down or straight up
into the brackets on the terminator plug, as shown in Figure 2Ć14. Your vertical
pressure will push the clips into place; do not squeeze or pull the clips out of
shape.
4. Push the spring clips attached to the SCSI 1 connector straight down or straight
up into the brackets on the terminator plug, as shown in Figure 2Ć14. Your
vertical pressure will push the clips into place; do not squeeze or pull the clips out
of shape.
Figure 2Ć14 Securing a SCSI Bus Terminator
NOTE: To remove a terminator, simply reverse the process illustrated above; pull the
clips vertically and gently pull the terminator out of the rear panel connector.