Data Aire gPod, Инструкция по установке, эксплуатации и обслуживанию, Страница: 94 / 100

Maintenance Inspection Checklist
Monthly Maintenance Inspection Checklist
Model No. Serial No.
Prepared by: See signature line below
Air Filters Condensate Drain and Pump (if applicable)
☐
Check for restricted air flow
☐
Check for water leaks
☐
Check for restricted air flow
Blower Section (if applicable)
☐
Pump operation
☐
Blower wheel free of debris moves freely
☐
Check belt tension and condition
Steam Generating Humidifier (if applicable)
☐
Bearings in good condition
☐
Check canister for deposits and water level
☐
Check pulleys and motor mounts
☐
Check condition of steam hose and clamps
Air Distribution Section Electrical Panel
☐
Check for restriction in grille(s)
☐
Check contractor operation
☐
dap4 or Mini-dap4 controller operations
Compressor
☐
Check for leaks
Equipment Runtimes
Condenser ___________ hours
Refrigeration Cycle/Section Compressor ___________ hours
☐
Check crank case temperature
Reheat No. 1 ___________ hours
Reheat No. 2 ___________ hours
Air Cooled Condenser (if applicable) Reheat No. 3 ___________ hours
☐
Condenser coil clean Humidifier ___________ hours
☐
Motor mounts tight Dehumidification ___________ hours
☐
Motor fan bearings in good condition Energy Saver ___________ hours
☐
Refrigeration lines properly supported
☐
Reset all to read zero runtimes
Water/Glycol Fluid Cooler (if applicable)
☐
Water regulating valve function
Temperature/Humidity set at: ___° ___% RH
☐
Check for water/glycol leaks (piping area)
Glycol Pump(s) (if applicable)
☐
Glycol leaks (pump area)
☐
Pump operation
☐
Auto air vent clean of mineral deposits
X