Thank you for purchasing this product
The unit has been developed using the latest wireless technology.
With the unit we are confident you will experience a great level of comfort and freedom
compared to using a standard telephone for making and receiving your calls.
READ THE USER GUIDE
The unit is very easy to use and set-up, although to get the best from your new purchase,
we recommend you read this User Guide before getting down to any calls.
UNPACKING
Remove the unit from its packaging and ensure that along with this User Guide you have
the correct main plug fitted to the power supply unit for your supply and the correct
specified accessories.
Retain the packing carton for storage of your unit, and also in the unlikely event that the
unit needs to be returned for service or repair.
IMPORTANT
Ensure that all electrical connections (including extension leads and interconnections
between pieces of equipment) are properly made and in accordance with the relevant
manufacturers instructions.
1. INTRODUCTION
Do not continue to operate the equipment if you are in any doubt about it working normally,
or if it is damaged in any way.
z
Switch off, withdraw the main plug and consult your dealer.
Do not allow electrical equipment to be exposed to rain or moisture.
Never push anything into holes, slots or any other opening as this could result in fatal
electrical shock.
Never guess or take chances with electrical equipment.
Do not open the telephone housing as doing so will void your warranty.
WARNING
Telephone headsets are capable of producing high levels of sound. Prolonged exposure to
high sound levels can cause damage to hearing.
CAUTION
: For intentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment
The use of a permanently attached antenna or of an antenna that user a unique coupling to
the intentional radiator shall be considered sufficient to comply with the provisions of
required this section.
The manufacturer may design the unit so that broken antenna can be replaced by the user,
but the use of a standard antenna jack or electrical connector is prohibited.
Содержание DW-773H
Страница 9: ......
