When charging, the LED on the front of the base unit will illuminate. The following
are the status and colors expected during the charging process.
Fully Charged GREEN LEDs
Charging RED LEDs
Before operation your headset must be paired with your Base unit, this can be
confirmed by the following check;(Factory default : paired)
Make sure that both Base and Headset unit is power on.
z
Check POWER LED(RED) on base unit is ON and
z
Check RED LED on headset periodically is blinking every 2 seconds.
If you can’t see the BLUE LED on the Base when you push the ON/OFF button on the
Base unit, you need to pair your Headset with your Base unit.
1
Pairing your Headset and Base Unit
Make sure your Base unit and headset are turned on.
z
Press and hold the pairing button on the Base unit until BLUE LED is blinking.
z
Press and hold the pairing button on the headset until BLUE LED turns off.
z
Now, you are ready to use.
6. Operation
2
Checking for compatibility
As telephone manufactures can vary their configuration, it is necessary to have
compatibility selections on the base unit to ensure that the unit is compatible with
virtually any telephone.
To check and adjust for compatibility between the base unit and the telephone
perform the following:
z
While
wearing
the
headset – push the ON/OFF button
z
If you cannot hear a dial tone with the factory setting, adjust the
COMPATIBILITY switch on the base unit bottom until you hear a clear dial
tone.
3
Making and ending call using a telephone with Lifter attached
z
While wearing the headset, press the ON/OFF button
z
Check the lifter function activates (telephone connection opens)
z
You can hear a dial tone
z
RED LED on the headset turns off (in-use status) and BLUE LED on the Base
unit turns on.
z
Dial desired number
z
To end the call press the ON/OFF button on the Base unit.
z
Check the lifter function de-activates (telephone connection closes)
z
RED LED on the headset will now periodically blinking and BLUE LED on the
Base unit turns off.
Содержание DW-773H
Страница 9: ......
