1.
Pairing
does not work ……
☞ After setting headset and base unit OFF and ON, try again the pairing.
2. No sound with the headset
.
☞ Check the TEL/PC button. TEL : Unlock PC : Lock
☞ Please check the cable connection between Base unit and Phone.
☞ Please check the compatibility switch. Adjust compatibility switch until you
can hear the dial tone.
3. Tx sound is not suitable or transmitted.
.
☞ Adjust the TX volume on the bottom of base unit.
☞ Make sure that TX mute function is deactivated.
We will repair or replace, at our opinion, this product if found defective due to materials or
workmanship within the warranty period beginning from the original date of purchase. This
product is warranted by authorized representative for the period specified.
The Original dated purchase receipt must be presented to the authorized service center
when service is rendered. On all carry-in models, transportation to and from the service
station is the responsibility of the purchaser.
This warranty does not cover damages due to accident, fire, flood, earthquake and/or other
acts of God; misuse, incorrect line voltage, improper installation, improper or unauthorized
Warranty and service
Trouble Shooting
repairs, commercial use or damages occurred in shipping. Exterior and interior finish,
lamps, glass, plastics parts and temperature probes are not covered under this warranty.
Customer adjustment according to the owner’s manual are not covered under this warranty.
This warranty is automatically void if the serial number is missing or altered.
※
Below a FCC Notice is only contained Wireless Headset Base
Class B digital device (Product Name: Wireless Headset Base)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, my case harmful interference to
radio communication. However, there is no guarantee that interference will not occur
In a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit difference from that to which the
receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help
Содержание DW-773H
Страница 9: ......
