background image

3

INTRODUCTION

Congratulations ! You have just purchased one of the most advanced

Liquid  Crystal Display Codepads in the world. Your DAS Custom

Alpha Numeric Codepad was carefully designed and manufactured

with  excellence in performance, and long term reliability in mind.

When you see the name DAS, you can be assured that this codepad

has past the most demanding quality and performance standards in

the industry.

This manual is furnished to help you understand your Alpha Numeric

Codepad and become proficient in its operation. But first, you should

read the Security System Operator's Manual  which pertains to the

general operation your security system. You must understand how

your security system is intended to work before you can understand

the operation of this codepad. The most important thing you should

do before attempting to operate your security system is to read both

manuals completely. Make sure you understand the operation of your

security system and its codepads before attempting to use your

system. This booklet should be kept in an accessible location for the

life of your security system.

If you have any questions about the operation of this codepad, or any

other question in regard to your security system, you should call the

company that installed your security system.

Содержание Smart DL-250



















Отзывы: