DAS Smart DL-250, Руководство оператора

Страница: 12 / 18

11
VIEWING CUSTOM ZONE DESCRIPTIONS
Your LCD codepad may have been programmed with Custom Zone Descriptions
by the installation company. This feature personalizes your LCD codepad for your
system needs. This allows your LCD codepad screen to display zone descriptions
such as "MASTER BEDROOM", rather than a generic description like "ZONE 12".
It is possible to view these Custom Zone Descriptions that have been
programmed into your LCD codepad by following the procedure below.
Press: and the screen will display:
D A
ENTER STARTING
ZONE # _ _
At this time, you can either enter the zone number where you wish to begin the
viewing process, or press the
[A] button which will begin this process at zone 1.
Continue pressing the [A] button to advance through the Custom Zone
Descriptions one at a time. If you choose to exit this mode before all descriptions
have been viewed, press the
[#] button.
PARTITIONED SYSTEMS OPERATION
If your system is a Smart DL-250 or the DL-300, you may have a multi-partitioned
system. If your codepad resides in one partition of a multi-partitioned system,
your codepad will provide the status of the zones in your partition using the
screen messages described earlier in this manual. However, you may
temporarily access the Master Mode as described later in this manual by
pressing
[C] [A] , followed by your 4-digit code. The Master Mode of operation
allows you to temporarily access any partition ( providing your code is authorized)
within the system and perform functions in other partitions. Read this entire
manual to help you understand the different screen messages that will be
displayed from your LCD codepad.
SETTING THE INTERNAL CLOCK