6
TURNING ON THE CHIME FEATURE
If this box is checked, your security system will operate in the "CHIME" mode, allowing the
monitoring of pre-designated zones while the security system is not armed. While in the
"CHIME" mode, the opening of any of these zones will produce a tone from the code pad
control. To activate this feature, press the "CHIME" digit which is noted on page 1 of this
manual. Five seconds after pressing this digit, a tone will occur indicating that the "CHIME"
feature has been activated. Repeat this procedure to turn the "CHIME" feature off.
MANUAL CODE PAD PANIC / HOLD-UP ALARM
If this box is checked, the "MANUAL PANIC/HOLD-UP" option has been selected. When
selected, pressing the star [
] and hatch [#] keys at the same time for one second, will sound a
local audible alarm. If your system is connected to a monitoring center, an emergency report
could be transmitted to that centre. These keys should only be pressed in an emergency
situation requiring immediate response by law enforcement personnel.
PLEASE NOTE: Some Panic/Hold-up alarms are programmed to be silent at the protected
building while reporting an alarm to the monitoring centre. Check with your installing company
to determine how your security system will respond to the Panic/Hold-up input.
MANUAL CODE PAD FIRE ALARM
If this box is checked, the "MANUAL FIRE ALARM" option has been selected by your installing
company. If so, you can activate the steady siren by pressing the [1] and [3] keys at the same
time for one second. If your system is connected to a monitoring centre, an emergency report
could be sent to that centre. These keys should only be pressed in an emergency situation
requiring response by fire department personnel.
MANUAL CODE PAD MEDICAL ALARM
If this box is checked, the "MANUAL MEDICAL ALARM" feature has been selected by your
installing company. If so, you can activate the auxiliary alarm by pressing the four [4] and six [6]
keys at the same time for one second. If your system is connected to a monitoring centre, an
emergency report could be sent to that centre. These keys should only be pressed in an
emergency situation requiring response by emergency personnel.
DURESS CODE
If this box is checked, your security system has a "DURESS CODE" option. If so, this code may
be programmed to send a special message to the central monitoring station if you are forced to
arm or disarm your security system against your will. Check with your
Installing/Servicing company to see if this option has been enabled for your system.
TELEPHONE LINE MONITOR
If this box is checked, your installing company has selected the TELEPHONE LINE MONITOR
which will monitor the telephone line that links your security system to the monitoring station.
When selected, the loss of this telephone line will flash the "READY" light while giving either
