DAS DL100 Скачать руководство пользователя страница 10

Страница: 10 / 12

AUDIBLE ALARM SOUNDS

FIRE Steady Siren

INTRUSION & PANIC Yelping siren

CODE PAD CONTROL LIGHT INDICATORS

ARMED

RED: On when system is armed; off otherwise. Blinks as alarm memory if alarm
was activated during arming cycle.

READY

GREEN: On when all zones are secure and/or isolated and the system is ready to
arm; off otherwise. Blinks for communicator trouble.

PARTIAL RED: On when "Partial Arm" is on; off otherwise.

TAMPER RED: On when "Box Tamper" is activated.

POWER

RED: On when AC power is on; off otherwise. Blinks when the system standby
battery is low.

ZONES

YELLOW: Blinking means unsecured. Steady means isolated. Off means secure.

CODE PAD CONTROL TONES (BEEPS)

A sounder is built into the code pad control and may sound for one of the following reasons:

Beeps for all keypresses.

Sounds a continuous tone during the Entry delay time, or Partial Arm delay time.

Pulses when a day zone is violated while the system is disarmed.

Pulses when a FIRE zone has a trouble condition.

Pulses when the armed status changes and the AC power is off.

Beeps 3 times for trying to arm with the "READY" light off, if "AUTOMATIC ISOLATE" has

not been selected.

Beeps 1 second for the "CHIME" feature.

Beeps 1 second at the end of the exit delay.

Beeps to indicate telephone line fault if selected.

When pulsing, the code pad sounder may be silenced by entering a valid code. The arm/disarm
state of your system will not change when entering a code to silence a pulsing code pad
sounder.

Содержание DL100













Результаты поиска

Содержание DL100

Отзывы:

Похожие инструкции для DL100

Бренды по названию

Популярные бренды

DAS DL100, Руководство пользователя

Результаты поиска

Содержание DL100

Отзывы:

Похожие инструкции для DL100

Бренды по названию

Популярные бренды