DAS AUDIO E11EVEN SOUND WP-1, Руководство пользователя

Страница: 6 / 16

INTRODUCTION
The WP-1 wall panel remote control, is compatible with iO-48 processors and 11-NET computer
control software.
The WP-1 wall panel remote is designed to allow simple and intuitive remote control of specific
parameters within iO-48 Audio processors.
The panel is designed to fit into a single-gang UK electrical wall box, such as a light switch recess, and
is both powered and controlled by connecting it, using a single standard Ethernet cable, to a
network switch / router, that is capable of providing PoE (Power Over Ethernet).
The WP-1 is programmed using the E11EVEN Sound by DAS 11-NET software, and can be set-up to
allow control of one or more iO-48 processors, connected to the same network as the wall panel,
allowing custom remote access to channel gains, routing (matrix) and mute status’, and also
allowing remote recalling of presets, if desired.
Once set-up, the WP-1 requires no technical knowledge to operate, allowing venue personnel to
operate the device with ease, utilising its customisable full colour LCD display, illuminated push
buttons and rotary control.
All screens can be custom set and labelled, by the install engineer, leaving staff with a clear, simple
and easy to use remote, allowing them to adjust the configuration and volume of the sound system
in multiple locations, throughout the venue.
The WP-1 is the perfect accompaniment to any professional venue installation.
E11EVEN SOUND \ WP-1 \ User’s Manual
6