background image

3

Terminals marked with the lightning symbol carry electrical current of sufficient magnitude to constitute risk of electric 

shock. Use only high quality cables with plugs pre-installed. All other installation or modification should be performed 

only by qualified personnel. This symbol, wherever it appears, alerts you to the presence of un-insulated dangerous 

voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it 

appears, alerts you to important operating and maintenance instructions in the accompanying literature.

Please read the manual. 

Caution: 

To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. 

Refer servicing to qualified personnel. 

Caution: To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus 

shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on 

the apparatus. 

Caution: These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do 

not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by 

qualified service personnel. 

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce

heat.

9.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other.  A grounding-type plug has two blades and a third grounding prong. The wide blade or the

third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11.

Use only attachments/accessories specified by the manufacturer.

12 .  

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 

13.

Unplug this apparatus during lightning storms or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.

The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

16.

Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall

remain readily operable.

17.

Correct disposal of this product: The wheeled bin symbol indicates that this product must not be disposed of

with household waste. Please refer to the WEEE page of this manual.

SAFETY PRECAUTIONS

E11EVEN SOUND \ 

WP-1

 \ 

User’s Manual

Содержание E11EVEN SOUND WP-1

















Отзывы: