Daro Saphir 1 +, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 24

01787 370187
|
info@darouv.co.uk
|
darouv.co.uk
3
Saphir Range
Description
The units are designed for the ultraviolet disinfection
of water between 5°C and 23°C and can be fitted
anywhere in a water system provided the maximum
pressure and peak flow requirements are less than
the maximum ratings (see specifications). The slower
the water flow, the more effective the unit will be. The
unit must be protected from frost when not operating.
For ease of maintenance, fitting stopcocks, a bypass
pipe and a drain tap with the unit is recommended.
For single-pass applications, it is best to install the
unit close to the point of use, removing the need
to store large volumes of treated water. If a storage
tank is used it must be closely covered and should
be cleaned and sterilised when the UV unit is fitted.
To ensure the water does not become stagnant the
tank should store no more than a few hours of water
supply.
Safety
• UV light can harm eyes and skin. Never operate the lamps outside of the chamber .
The units are safe when in normal use.
• Read the instructions fully before use – maintenance must only be carried out by
competent individuals.
• Do not operate the unit if any part appears damaged.
• The stainless steel chamber must always be earthed.
• Water and electricity are a dangerous combination - it is essential that there are no water leaks
in or around the unit that could result in the electrical system becoming wet.
If such a leak occurs, do not touch anything electrical when either it, or your hands are wet .
1. Switch off the power at the mains supply point
2. Switch off the water at the mains supply point
3. Find and fix the leak
4. Completely dry the unit and control box (inside and outside) before reusing