DARLEY
SCREENGUARD STAINLESS STEEL MESH SECURITY SYSTEM
29
Code ZOX14861
Use and maintenance manual
Page 22 of 24
CAUTION
After carrying out maintenance operations, before putting the punching machine back into
service, check that any safety guards removed have been put back in position correctly
replaced and fixed.
It is prohibited:
to use the punching machine when there is clearly condensation in the filter or in the
general compressed air supply;
to use the punching machine with “dry” punches, i.e. without lubrication;
to use oils that are unsuitable and other than those recommended in the air intake filter and
on the punches.
6.1.2 Problems, causes and remedies
Problem
Cause
Remedy
Personnel
Insertion tool
shows a lack of power
Valve and/or pedal damaged
Replace
Qualified
Pneumatic cylinder seal worn
Replace worn seal.
Qualified
Worn punches and dies
Replace worn parts and
those that cannot be re-
sharpened
Qualified (unless
indicated otherwise in
the chapter on spare
parts)
Insufficient or lack of air pressure
Check the air supply
Qualified
6.1.3 Decommissioning
The machine or its components must not be disposed of with urban waste or the like, but
instead must be sent for separate collection in conformity with current legislation.
