Darfon B09ULF, Руководство по установке

Страница: 8 / 28

I N S T A L L A T I O N M A N U A L B 0 9 U L F L I T H I U M B A T T E R Y
R e v . 1 © 2 0 1 9 D a r f o n E l e c t r o n i c s C o r p . P a g e 8 o f 2 8
Parallel
machine CAN
communication
supplementary
instructions
RJ45-8P8C
2-3 A 120 resistor in 2-
3 pins for parallel
CAN communication
is needed to
terminate the line. When multiple battery boxes are
combined for CAN communication, an 8-
PIN terminator with an 120 resistor is
inserted in the first and last CAN
communication interfaces for parallel
CAN communication matching resistors.
(The terminators are attached as an
accessory at the time of shipment)
DIP switch 1-4 The first 3 digits set the battery address and the 4th digit sets the
operating mode. The "ON" side indicates "1" and the other side
indicates "0"
•
When the system is configured with a battery, the 4th bit is set
•
When the system is configured with multiple battery packs, the
•
For detailed description of the DIP switch, refer to Section 6.
Dry contact 1-4 Short the 1st and 3rd or 2nd and 4th pins to boot the battery pack.