6
1.3. Attention
Keep the oximeter away from dust, vibration, corrosive substances, explosive materials,
high temperature and moisture.
If the oximeter gets wet, please stop operating it.
When transported from a cold environment to a warm or humid environment, please do
not use it immediately and allow the product to acclimatise to the area.
DO NOT operate the buttons on front panel with sharp objects (e.g. pens).
High temperature or high pressure steam disinfection of the oximeter is not permitted.
Refer to User Manual in the relative chapter (7.1) for instructions of cleaning and
disinfection.
Do not have the oximeter submersed in liquid. When it needs cleaning, please wipe its
surface with medical alcohol by soft material. Do not spray any liquid on the device
directly.
When cleaning the device with water, the temperature of the water should be lower than
60°C.
The update period of data is less than 5 seconds, this can be altered to allow different
pulse rates to be detected.
Please read the measured value when the waveform on screen is displaying equably and
consistently, this measured value is the optimal value. And the waveform at the moment
is the standard one.
If any abnormal conditions or results appear on the screen during the test process, please
remove the measured part and then reinsert to reset and restore normal use.
The device has an average product lifetime of three years since first use.
The V60 has an alarm function, users can check and set this function according to the
instructions in chapter 6.1 as a reference.
The V60 has the functionality to allow settable alarm limits, when the measured data is
beyond the highest or lowest limits, the alarm will sound automatically.
The V60’s alarm system can be paused or completely stopped according to user
preference. This function can be adjusted through the menu system shown in chapter 6.1.
