![DARAY V460S Series Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/daray/v460s-series/v460s-series_user-manual-and-installation-manual_3483296008.webp)
Page
7
of 49
1.3 Pre-Operation Responsibilities and component packing list
This document is a guide to the steps that need to be performed to correctly operate the V460S
Series Ambulatory patient monitor system. However, any work required for the setup or operation
of the device is the responsibility of the owner or designated operators.
1.4 Packing List
The components supplied by Daray should be the following items in the specified quantities,
unless otherwise arranged.
V500 Packing List
Qty.
V460 Ambulatory Patient Monitor
1
Adult SpO
2
Finger Sensor
1
Adult NIBP Cuff
1
Carry Case
1
PC Software CD
1
USB cable
1
User Manual
1
Please be aware using un-approved accessories may cause damage to the device.
Please contact Daray for any further information.
1.5 Safety Information
The safety statements presented in this chapter refer to the basic safety information that the
operator of the monitor should pay attention to and abide by. This information may be repeated
within subsequent sections to reiterate our warnings, some sections may also have warnings for
specific operational aspects.
Warnings and Cautions are used throughout this manual to point out hazards and to designate a
degree or level of seriousness, these should be observed at all times and include electrical safety
warnings.
These warnings are used to indicate a potential hazard situation or unsafe practice that, if not
avoided, could result in death or serious injury.
Cautionary notices are used to indicate a potential hazard or unsafe practice that, if not avoided,
could result in minor personal injury or product/property damage.
Considerations
Pre-use
To ensure patient and user safety, its recommended that the device and
its accessories are regularly checked for damage and normal operation
before use; if any damage is found you should immediately stop using
the device and contact your relevant body.
Usage
This monitor is intended only as an adjunct in patient assessment. It
must be used in conjunction with clinical signs and symptoms. It is not
intended as a device used for treatment purposes. This device should
only ever be used on one patient at a time.
Warning: If Luer lock connectors are used in the construction of
tubing, there is a possibility that they might be inadvertently
connected to intravascular fluid systems, allowing air to be pumped
into a blood vessel.
Do not pull or lift the monitor by its connection cables. This may cause
damage to the leads or the stability of the device leading to subsequent
patient injuries
Do not use the monitor when wet, for any internal water damage please
contact daray.
Содержание V460S Series
