DARAY V460S Series, Руководство пользователя и инструкция по установке

Страница: 25 / 50

Page 24 of 49
6.1 Software Requirements
To appropriately run this software you require a minimum computer specification of
Processor: Pentium IV 1.8Gb or more
Operation System:Windows XP
EMS memory: 256Mb and more
Hard Disk: 40Gb or more
Display: 17 inch or more
CD-ROM Drive
USB: 2 or more
A printer with a 600 DPI print resolution
6.2 Installation of the software
Place the CD-ROM in the CD-ROM compartment located on your computer.
If your computers Auto Play function is enabled, this will load the installer; then follow the
instructions when they appear on your screen. Otherwise, follow the install instructions below:
Open Windows Explorer
Click on the root CD-ROM directory
Double click file V460_Setup.exe (V460S_Setup.exe)
Follow the instructions that appear on the screen
After installing the software, open it, plug in the monitor via the mini USB port and the monitor
will power on; the computer will show a dialog box, now select "Auto install".
Once all installations are complete, you may need to restart your computer. After this, your
V460(S) should now be ready to use.
6.3 Considerations
Please be aware, depending on the operating system used and the model of V460, the layout or
appearance of the software may differ slightly
6.4 Introduction to the software
6.4.1 User registration
Each time you open the software the following dialog box will appear for the user's name. For new
users type in the user's name. Once new users are setup in the list you may select each user from
the drop down list function. Once you have loaded into a user you can switch to a different one by
going to - "File" then click on "Change User". This feature is available to allow each user to store
his or her personal configurations, such as thresholds.
Clicking the "Delete" button will delete the current selected users’ information and configuration.
Clicking the "Delete all" Button will delete all users’ info and their configurations.
If you are a new user, clicking the "Okay" Button will show the following dialog box.