DARAY V460S Series, Руководство пользователя и инструкция по установке

Страница: 37 / 50

Page 36 of 49
6.4.20 Report Printing
After you have completed editing the BP data, diagnosis information, trends and so on; the
software will create a series of diagnostic reports. From these reports you can select all of the
pages or a small selection of them for printing. Your printing selection can be saved as a default
collection of information for the next time you want to print. From the menu, select "Report" and
then select "Configure Report" to show the following dialog box:
You can select an existing report to print; or you may also click "Edit Report" to edit the selected
report.
Once you have selected your pages for printing or even if you select the whole document you will
need to select if you want an SpO
2
report to be printed as well. You will need to ensure that the
"SpO
2
Report" box is checked to signify you want this data adding to your report. You can only do
this with results that have a data file that includes SpO
2
data.
Click the "Title" button to add a title to the report printout. "Add Report" adds a new report. If
you don't need the current report, you can also click "Delete Report" to delete it.
The default paper size is: A4, from the menu select "Report" followed by "Select printer", this will
allow you to select a printer. From the menu select "Report" and then choose "Print preview" to
preview the page you selected.
When you’re sure you want to print the report, press shortcut key or from menu
select "Report" and then select "Print".
6.4.21 Help
Press the help shortcut key to show a standard help document. Meanwhile, you will find
in the operation interface; click this button to show the active help system.
The active help menu should help with general introductions to common issues.