EMB-OPT01 User’s Manual
6
LED D4 turns off when the optical channel (#0) is connected.
LED D5 turns on when the optical channel (#1) vertical sync signal (Vsync) is detected.
LED D6 turns on when the optical channel (#1) horizontal sync signal (Hsync) is detected.
LED D7 shows the value divided by Vsync /4 to know the operation of the optical channel (#1)
vertical sync signal.
LED D8 turns off when the optical channel (#1) is connected.
LED D9 turns on when power is supplied to the board and initialization is complete..
2-1
J1 Connector (Mini MDR-26)
The figure below shows the pin map of the J1 connector of the board used when using Base
or Medium/Full Configuration Camera Link. All pin specifications are input/output based on the
Camera Link standard, so please refer to the Camera Link standard document for details.
3
10
9
8
7
6
1
2
5
4
19
18
17
16
15
14
13
12
11
24
23
22
21
20
Inner shield
Inner shield
26
25
Z0-
TERMI+
YCLK-
Y3-
Y2-
Y1-
Y0-
Inner shield
Frame Grabber
Z0+
TERMI-
YCLK+
Y3+
Y2+
Y1+
Y0+
Inner shield
Z3+
ZCLK+
Z2+
Z1+
Z3-
ZCLK-
Z2-
Z1-
CC1-
DRTX+
DRRX-
CC4+
CC3-
CC2+
DRRX+
DRTX-
CC4-
CC3+
CC2-
CC1+
[Figure 2-2. EMB-OPT01 J1 Connector Pin-out]
