EMB-OPT01 User’s Manual
10
2-3
J4 Connector
12V DC External Power CONNECTER (DC-005(2.0))
[Figure 2-4. J4 Connector]
2-4
SW1 Switch
It is a camera setup mode selection switch.
[Figure 2-5. SW1]
Switch #1 : Tap Setup.
ON : 8 Tap (Over 40bit)
OFF : 1/2/3/4 Tap (Under 32bit)
Switch #2 : (VSync : Vertical Synchronization) signal polarity
ON : Inverse
OFF : Normal
Switch #3 : DVAL : Decide whether to use Data Validation.
ON : DVAL Use
OFF : DVAL No Use
Switch #2, #4 ~ #8 : Reserved
