background image

The blue high/low wires from the headlight aren’t long enough. Should I lengthen them?

Some vehicles may need a high/low extension depending on where the harness is installed (Dapper Lighting SKU 
#HLEXT). It is recommended to use Dapper Lighting wiring to ensure proper function.

My headlights are amazing!

You mean they’re Dapper? We agree. Send us your photos at 

[email protected]

 for a chance to be 

featured.

The bulb wires aren’t long enough (from the ballast). What can I do?

Some vehicles may need an extension harness if the ballasts are mounted farther than 2FT from
the headlights. You will need Amp Extensions (Dapper Lighting SKU #AMPEXT)

(833)-DAPPER-1 / (833)-327-7371

[email protected]

www.dapperlighting.com

34

My Dapper Lighting Harness doesn’t plug into my OEM headlight plug. Help!

You may need an adapter depending on your specific vehicle. Here are the common adapters
and vehicle types: 

     Hummer H2: 9007 to H4 (Dapper Lighting SKU #9007H4AD)
     Jeep Wrangler: H13 to H4 (Dapper Lighting SKU #H13H4AD)

Contact a Dapper Lighting Representative if you do not see the wiring adapter you need listed.

Troubleshooting &

 

FAQ’s

Содержание V1



































Отзывы: