Halogen Kit
Install Guide
Diode Polarity
In some cases, you may need to switch the
polarity on the diodes for your high/low to work
properly. If this is the case, you must switch the
polarity of your small black/red diode to (red
black/ red black). Try your low and high beams
again. If this works, move on to the next step. If
you are still having issues, please double check
all of your connections. If there is still a problem
contact a Dapper Lighting Technician.
For Headlight Aiming Instructions, please refer to page 30.
For Troubleshooting and FAQs, please refer to page 33.
City Lights/Running
Lights/Halo and Angel Eyes
(Optional)
Most Dapper Lighting Headlights come with either a built in
city/running lights below the projector or a built in halo/angel eye
around the projector. These do NOT come pre-wired and are open
for different uses. You can wire them up to turn signals, parking
lights, or leave them as they are. For the city/running lights, the
halogen T10 bulbs included can also be upgraded to Dapper
Lighting LED T10 Bulbs (Dapper Lighting SKU #T105SMD).
Halo/angel eyes cannot be upgraded at this time.
(833)-DAPPER-1 / (833)-327-7371
www.dapperlighting.com
13
