DAPAudio Sessionmix 12 DSP, Руководство пользователя

Страница: 16 / 21

14
Fig. 15
54. Phantom Power Switch
Press this button to turn the phantom power +48V on. Do not connect any unbalanced microphones with
the phantom power switched on. The red Phantom LED (31) will light if the phantom power is activated.
55. Main out R unbalanced
56. Main out L unbalanced
57. Power On/Off
Do not supply power before the whole system is set up and connected properly.
58.
IEC power inlet and fuse
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, and then turn on the power switch (57) to operate
the unit.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (T1,6A).
59. Footswitch
You can connect a Footswitch to this jack. The footswitch makes it easy to switch on and off the build-in
effect.
60. Main out R balanced
61. Main out L balanced
62. Control room out stereo unbalanced
63. ALT 3-4 out stereo unbalanced
64. Channel 1-4 insert
Also see page 10.