DAPAudio DS-860D, Руководство по эксплуатации продукта

Страница: 11 / 18

9
Functions
NAMES AND FUNCTIONS
Below is a description of the functions of the controls.
CD-player Functions
1.
LCD Display
2. Loop IN:
Press this button to set the startpoint of the loop.
3. Loop OUT:
Press this button to set the endpoint of the loop.
4. B.Skip :
Use this button to go back to the beginning of the current track or select a previous track for playing.
5. +10 (Track + 10 Button):
Use the button to skip forward 10 tracks.
6. F.Skip :
Use this button to skip to the next track.
7. Pitch –:
The CD slows down while this button is pressed. Release the button to return to the original BPM.
8. Pitch :
If you push this button, you can adjust the pitch with the pitch fader.
9. Pitch +:
The CD speeds up as long as this button is pressed. Release the button to return to the original BPM.
10. Time:
Press this button to switch the Time-Display between the elapsed time and remaining time. The
selected mode is indicated by the ELAPSED, REMAIN and TOTAL REMAIN indicator on the LCD.
11. Single:
Press this button to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, the unit stops playing after each track. In CONTINUOUS mode,
the unit plays all tracks and then stops.
12. Pgm (Program):
Press the Pgm Button, the player will enter the program mode and stop the CD playback.
13. Repeat:
Use this button to repeat one track or all tracks of the CD.
14. Cue:
Press the Cue button during playback to return to the position at which playback is started.
15. PLAY/PAUSE-button :
Use this button to start playback. Press once to start playback, twice to set the pause mode, and
again to resume playback.
16/ 23. Eject :
Press this button to open and close the disc holder . The disc holder cannot be opened during
playback, so stop playback before pressing the button.
17. RELOOP:
This button is used to start the last saved loop. To finish the loop, press the Reloop button again.
18. Shuttle Wheel:
In search mode the shuttle wheel can be used to search forward or backwards in the music track, as
well as fine tuning the cue point in pause mode. In pitch bend mode the shuttle wheel will function
the same as the pitch bend allowing you speed up (forward) or slow down (rewind).
19. Jogmode:
When the jogmode button is illuminated it indicates the Shuttle Wheel is in search mode, when not
illuminated it indicates the jog wheel is in pitch bend mode.
20. Pitch Fader:
Use this fader to adjust the CD pitch. Slide up to increase the pitch, slide down to decrease the pitch.
21. Disc Holder
Place the disc in the holder. Press the Eject button to open and close the disc holder.