DAPAudio DS-860D, Руководство по эксплуатации продукта

Страница: 12 / 18

10
22. Power ON/OFF
This is the main Power switch. Press to turn the device on.
24. Load LED
If there is no disc in the disc holder , the LED is lit. While loading the buffer, the LED blinks and when
the CD player is ready for playback, the LED dims.
25. Controller- Main Unit Connector
Use the supplied control cable only. Using other cables will result in damage.
26. RCA Line Out
Use these outputs to connect a mixer with unbalanced RCA inputs.
Check the 115V/ 230V selector before connecting to the mains.
27. 115V/230V Selector
Before plugging the DS-2680 into any wall socket, make sure that the 115V/230V Selector is set
to the proper voltage.
28. Mains Cord
Connect the mains cord to a 230/240Vac 50/60Hz power socket.
Operations
1. Opening and closing of the disc holder
• Turn the unit’s power on. Press the Eject button to open the disc holder.
• The disc holder cannot be opened during playback, to prevent playback from being interrupted if
the
Eject button is pressed accidentally. Stop the playback first, then press the Eject button.
2. Loading CD’s
• Hold the disc by the edges and place it in the disc holder , then press the Eject button to close the
holder. The unit will show the total track number and the total playing time for about 2
seconds and then enter the cue condition. The cue point will be set to the music’s starting point of
the first track automatically.
CAUTION:
• Do not place any foreign objects in the disc holder and do not place more than one disc in the disc
holder at a time.
• Do not push the disc holder in manually when the power is off, as this may result in malfunction and
damages the player.
3. Selecting Tracks
• Press the Sip-buttons to move to a higher or lower track.
• Hold the Skip- buttons to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the skip search operation
is completed.
• If the Skip-button is pressed while at the last track, the first track is selected. In the same way,
If the Skip- button is pressed while at the first track, the last track is selected.
4. Starting Playback
• Press the Play/Pause button during the pause or cue condition to start playback, the Play indicator
lights.
• The point at which playback starts is automatically stored in the memory as the cue point. The CD
player then returns to the cue point when the
Cue button is pressed.
Fig. 6