DAPAudio DS-860D, Руководство по эксплуатации продукта

Страница: 14 / 18

12
10. Scanning (Fast forward/Fast backward)
• Scanning is a function for moving quickly forward or backward while rotating the Shuttle Wheel .
• Turn the Shuttle Wheel to begin scanning. The disc moves rapidly forward or backward and the
sound is audible. The current scan point is indicated on the LCD.
• Turn the
Shuttle Wheel clockwise to scan in the forward direction, counterclockwise to scan in the
reverse direction.
11. Time Display
Press Time button to select time display mode:
1. Elapsed time of a track (ELAPSED).
2. Remaining time of a track (REMAIN).
3. Remaining time of the disc (TOTAL REMAIN).
12. Changing Pitch of the song
There are three tools available for matching the BPM of the CD:
1. Use the
Pitch slider to adjust the BPM.
2. Use the Pitch Bend buttons to change the BPM temporarily.
3. Turn the Shuttle wheel to change the BPM temporarily.
1) Pitch-Slider
• To adjust the BPM by sliding the pitch slider up or down, press the Pitch button to turn on
the Pitch adjustment function.
• Slide the Pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is +-
12%.
2) Pitch-Bending
• The BPM increases or decreases respectively while the PITCH BEND + or PITCH BEND - button is
pressed.
• The BPM increase depends on how long you hold the button. If you hold the button for about 5
seconds, the BPM will go either to +12% for PITCH BEND
+ or -12% for PITCH BEND - . If you tap the
button, the BPM will only change a little so you can change the beat slightly without an audible
change in the music.
• The CD will return to the BPM indicated by the
Pitch slider when you release the PITCH BEND + or
PITCH BEND - buttons.
3) Turn the Shuttle wheel
• Turn the Shuttle wheel clockwise during play to increase the BPM in the forward direction,
counterclockwise to decrease the BPM. The faster you turn the wheel, the more BPM changes.
The BPM changes with a range of +/-12%.
• When you release the
Shuttle wheel , the CD will return to the BPM indicated by the pitch slider .
13. Program Play
1. Press the Pgm button, the player will enter the program mode and the CD will stop rotating.
2. Select the desired track by pressing the Skip button or a direct access button , then press the Pgm
button again. The selected track will be added to the program sequence.
3. Repeat step 2. A maximum of 20 tracks can be programmed.
4. Press the
Play/Pause button to start the program play from the first selection.
5. Press the Pgm button again during program play to stop playing.
6. Press and hold the button more than 2 seconds to cancel the program mode and erase all the
current program contents.
14. Loop PLAY
1. Press the Loop IN button to set the loop start point, the Loop indicator will flash on the LCD.
2. Press the Loop OUT button to set the loop end point. After the end point is set, the playback will
enter the loop play from start point to end point repeatedly.
3. Press one of the Loop buttons again, the loop play function is canceled, the Loop indicator
dimms.