DAPAudio DM-1000, Руководство пользователя

Страница: 12 / 16

Ordercode: D4212 / D4213
DM-1000 / DM-2000
Connection Cables
Take care of your cables by always holding them by the connectors and avoiding knots and twists when
coiling them: This gives the advantage of increasing their lifespan and reliability. Periodically check your
cables. A great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely
by using unsuitable or faulty cables.
Unbalanced Balanced
For these applications the unit provides 1/4" TRS and XLR connectors to easily interface with most
professional audio devices. Follow the configuration examples below for your particular connection.
Maintenance
The DM-1000 / DM-2000 requires almost no maintenance. However, you should keep the unit clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Replacing the Fuse
You do not have to replace the fuse on this device as the fuse is automatic.
01) In case of a power surge, short-circuit or inappropriate power supply, press the reset button located
on the rear of the device, and the device will function normally.
02) Try to determine the cause of the problem, so that the situation does not happen in the future.
11