12
Stop playback
There are two ways to stop playback:
• Press the
play/ pause (13)
button during playback mode to pause at that point.
• Push the
cue (11)
button during playback to return to the cue point and enter pause mode.
Fig. 8
Pausing
1. Push the
play/pause (13)
button to switch between play and pause.
2. The
play/pause (13)
button and the
cue (11)
button will flash when the unit is in pause mode.
3. Playback resumes when the
play/pause (13)
button is pushed again.
Setting a cue point
1. Push the
play/pause (13)
button to switch between play and pause.
2. The
play/pause (13)
button and the
cue (11)
button will flash when the unit is in pause mode.
3. Dial the
jogwheel (10)
to go to your desired cue point (if necessary).
4. Press the
play/pause (13)
button again and your cue point has been stored and playback will
continue.
Setting a hot cue Point
1. Push the
play/pause (13)
button to switch between play and pause.
2. The
play/pause (13)
button and the
cue (11)
button will flash when the unit is in pause mode.
3. Dial the
jogwheel (10)
to go to the desired cue point (if necessary).
4. Push the
rec (14)
button, all four hot cue buttons (
A (16), B (18), C (20)
or
D (22)
) will light up red.
5. Push the hot cue button (
A (16), B (18), C (20)
or
D (22)
) in which you want to store your hot cue point.
Now all hot cue buttons (
A (16), B (18), C (20)
or
D (22)
) which contain a cue point will light up green.
Cueing
Cueing is the action of preparing for playback.
• Push the
Cue (11)
button, the player will enter the cue mode, the playback returns to the cue point
And enters pause condition, the
cue (11)
button and the
play/pause (13)
button will flash. Pushing the
play/ Pause (13)
button will start playback from the cue point.
• If the
cue (11)
button is pushed after a search operation or scan operation, the playback returns to the
cue point and enters pause mode.
Note
: If the
Cue (11)
button is pushed and hold, playback will start from the cue point, when the button is
released the player will return to the cue point and enter pause mode automatically; it allows you to
check the cue point.
Frame search
Frame search is a function for monitoring the sound at a certain section of the disc and manually
Changing the position. Searching is used to set a starting point with precision.
• Dial the
jogwheel (10)
while in pause mode or cue mode to begin searching. The sound for one
revolution of the disc is output repeatedly. The point at which the sound starts is indicated on the LCD.
• While dialing the
jogwheel (10)
, the point from which the sound output moves is the a number of
Frames corresponding with the number of milliseconds, and the time display in the
LCD display (15)
also changes.
• The search point moves in the forward direction when the
jogwheel (10)
is dialed clockwise.
When the
jogwheel (10)
is dialed counterclockwise, the search point will move backwards.
