10
26.
FX Select button
Pushing this button allows you to select one of the five effects as shown below.
Fig. 4
27. Title button
Pushing this button allows you to select one of the four display modes (MP-3 only) as shown below.
Fig. 5
Pushing and holding allows you to dial a playlist format using the
edit (3)
encoder. Releasing the title
button enters the selected format.
Fig. 6
28.
Time button
Push this button to switch the
TIME
indication in the
LCD display (15)
between the elapsed time and
remaining time. The selected mode is indicated by the
ELAPSED
or
REMAIN
.
29.
Single
button
Push this button to switch between the auto-cue mode and continuous play mode.
The selected mode is indicated by respectively
Auto-CUE
or
CONTINUE
in the
LCD display (15)
.
In auto-cue mode, the unit stops playing after each track.
In continuous play mode, the unit plays all tracks and then stops.
30.
Pitch Bend + button
The CD speeds up while pushing and holding this button. Release the button to return to the original
BPM.
31.
Pitch Bend – button
The CD slows down while using and holding this button. Release the button to return to the original
BPM.
32.
Pitch Control
Fader
Use this fader to adjust the CD pitch. Move the fader upwards to decrease the pitch, move the fader
downwards to increase the pitch.
33. Range 8% LED
Indicates that the maximum range for the
pitch control fader (32)
is ± 8%.
34. Range 16% LED
Indicates that the maximum range for the
pitch control fader (32)
is ± 16%.
35. Brake button
Pushing and holding this button while dialing the jog wheel allows you to set the start/break time
between 0,5 and 6 seconds. Arm the brake function by pushing the
brake (35)
button, the
brake (35)
button lights up red indicating the brake function is armed. Pushing the
play/pause (13)
button will actually trigger the start/break function.
36. Range button
Pushing this button allows you to change the maximum range for pitch control and lets you select a
range of ± 8%, ± 16% or ±100%.
37. Master tempo button
Allows you to toggle the master tempo mode on or off. When the master tempo mode is active,
the
master tempo (37)
button will light up red. While master tempo is active, the pitch fader allows
you to shift the pitch of the song played back while the tempo of the song stays the stays
unchanged.
38. Range 100% LED
Indicates that the maximum range for the
pitch control fader (32)
is ± 100%.
39. Disc slot
Place the disc gently in the slot. The disk will load automatically. Stop playback and press the
eject
(24)
button to eject the disk.
40. Digital out
Digital output for connecting to a digital mixer.
41. Line out L/R
RCA stereo line output.
