01AUG 1005GB
Cat.20 / Tab. 05.91 / Page 05.03
To save the new values, press the M button for more than 3 seconds. The controller automati-
cally returns from the parameter setting mode to the parameter-selecting mode when the val-
ues are saved.
Returning to the operating mode:
Before returning to the operating mode, change from the parameter setting mode to the pa-
rameter-selecting mode as described above. To return from the parameter-selecting mode
(from any parameter) to the operating mode, press both the
∆
and the
∇
button for more than 3
seconds. If no buttons are activated, the operating mode is automatically returned to after 4
minutes (evt. new parameter limits are not saved).
Param.
No.
Text in LCD
Function
Ex works setting
Range
00
DP-MIN
∆
P –MIN
700 Pa
260-4000 Pa
01
DP-MAX
∆
P – MAX
1300 Pa
280-4400 Pa
02
DP-ALARM
∆
P Alarm
2300 Pa
300-5000 Pa
03
Pulse time#
Puls time
60 ms
30-300ms
04
Interval time
Interval time
10
4-500 s
05
DTC Interval time
DT interval time
6s
2-100 s
06
Total valve no..#
# of valves
0
0-160
07
DTC Down Time Cl.# Down-time cycles
6
0-32
08
DTCmax#
Parameter for Down-time
Method 2
1000 280-4000
Pa
09
DTCmin#
Parameter for Down-time
Method 3
260 260-2000
Pa
10
Hours in operati##
Operating hours
0-250000 h
11
Text Language
Languages
**
Different languages are
available
12
DP-Display range
Display range
Pa
Pa – Inch / WC
13
DTC Cleaning Mod#
3 different Down-time modes available 2
1-3
14
Test mode
0=Test off
1=Valve test
2=Start up test
3=
∆
p
-trimming test
4-7=test of relays and display
0 7
15
Display Contrast
68
10-200
16
Service Run Hours
Service – operating hours
17
Ser. Run Hours Al.
Service – operating hours – alarm
3000 h
0-25000 h
18
Ser. Run Hou. Code
Service – operating hours – code
##
##
19
∆
p-Mode
∆
p-Mode
On
On / Off
20
Setting Lock
Parameters cannot be changed - Code
##
##
** Presently English, Danish, French, German.
# Locked if parameter no. 20 is ON
## Cannot be changed.
Setting of the valves on the main unit takes place in the setting mode.
