42
Programming
Introduction
Below please find a step-by-step explanation of how to program the control unit and
how to read, change and/or delete any programming that has already been entered.
At the end there is a description of how to change the way the unit is currently running
without changing the program - i.e. a temporary setting.
Definition
The programming decides at which days and hours the unit will automatically start
and/or turn off the heater and/or the supply.
It can contain 50 programs.
Programming of start and end includes 2 programs.
Please note
•
Before programming the control unit date and hours must be set (see previous ex-
planations)
•
The programming will not have effect until after the first program change
Programming
Follow these guidelines (example) for programming new programs of start and end:
Step
Action
1
Press Menu and step to PROGRAM by pressing the left hand buttons.
The following is an example of programming of channel 1:
•
ON command at 15:00
•
OFF command at 18:00
2
•
Step to NEW with
Δ
and
∇
•
Approve with OK
Free channels are briefly
shown
•
Choose channel 1 with
4
/
9
•
Approve with OK
3
•
Choose single day or day
block with
4
/
9
•
Approve with OK
Continued overleaf
