manualshive.com logo in svg

Dantel 46502, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46502 Скачать руководство пользователя страница 40

P

AGE

 40

46502-0999 <90-00021>

Finish

The Finish options lets you save changes to the terminal con-
figuration. You can save the changes in two ways:

1.

You can create a file that replaces the default settings with new
default settings in the file that you make. The default settings are
those that the computer uses for the terminal configuration when-
ever you enter the T/Shell program from the Master Menu. The
initial default settings are listed under Terminal Attributes in
this section.

2.

You can create a file that you can use later but does not change the
default settings.

To create a file that 

does change the default settings:

1.

Make the changes as described under Terminal Attributes in this
section.

2.

Make the changes as described under Shift Fxx, Ctrl Fxx, and Alt
Fxx in this section.

3.

Type F when you are in the Edit Configuration window.

4.

Type the file name TERM.

5.

Press Enter.

The new settings are now the defaults for the terminal configu-
ration whenever you enter the T/Shell program from the Master
Menu.

To create a file that 

does not change the default settings:

1.

Make the changes as described under Terminal Attributes in this
section.

2.

Make the changes as described under Shift Fxx, Ctrl Fxx, and Alt
Fxx in this section.

3.

Type F when you are in the Edit Configuration window.

4.

Type a valid DOS file name without an extension. The extension
.CNF is automatically appended to the name.

5.

Press Enter.

Whenever you enter the T/Shell program from the Master Menu,
the initial default settings are still used for the terminal configu-
ration. To change the default settings using the file that you just
created:

1.

Press F5 (Ld Cnf) from the main terminal emulator screen.

2.

Enter the name of the file.

3.

Press Enter.

The settings in the file are now the defaults. They remain active
until you change the settings, load a different terminal configu-
ration file, or exit the program to the Master Menu.

TERMINAL EMULATOR

Содержание 46502













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды