manualshive.com logo in svg

Dantel 46502, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46502 Скачать руководство пользователя страница 38

P

AGE

 38

46502-0999 <90-00021>

C

TRL

 F

XX

The C)trl Fxx option allows you to define text strings that you
can play back when you press the Ctrl key and one of the func-
tion keys simultaneously.

To program the Ctrl and function keys:

1.

Type C. This screen appears:

2.

Enter a string of characters, up to a maximum of 56 characters. An
Enter can be included as part of the string by entering Ctrl-M.

3.

Press Enter.

If you do not want to program a particular function key, press En-
ter to advance to the next field.

If you do not want to program all the function keys, press F10 to
return to the Edit Configuration window.

At the last field (Ctrl F10), the Edit Configuration window appears
when you press Enter.

The programming of the function keys remains in effect until
you change the programming or you exit to the Master Menu.
When you return to the Master Menu, the programming of the
function keys is erased.

See Finish in this section if you wish to save the programming.

TERMINAL EMULATOR

Содержание 46502













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды