manualshive.com logo in svg

Dantel 46502, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46502 Скачать руководство пользователя страница 31

46502-0999 <90-00021>

 P

AGE

 31

PARAMETERS

T

he GPP Editor Parameters option of the GPP Module menu

allows you to select the communications parameters for

uploading and downloading GPP database configurations. You
also can specify where to store reports on database configura-
tions on your computer.

Here is the GPP Parameters window:

To change the parameters:

1.

Enter the desired value.

2.

Press Enter.

If you do not want to change a value at a particular field, press
Enter to advance to the next field.

If you have changed some fields and all the remaining fields are
acceptable, press F8 to save the changes and return to the GPP
Editor Module menu.

At the last field (Rpt Path), if you change the value, press Enter to
save all changes to the system parameters. If you do not change the
value of the report path, press Enter or F8 to save any other
changes to the system parameters. The GPP Editor Module menu
appears.

Here are descriptions of each parameter:

Com Port - Specifies which communications port to use when
uploading or downloading database configurations. Acceptable
entries are 1-4. This field defaults to 1.

WARNING:

If you specify a communications port that your computer does
not have, the T/Shell program locks up when the computer
tries to use that port and you must reboot your computer.

Содержание 46502













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды