manualshive.com logo in svg

Dantel 46502, Руководство по установке и эксплуатации

Поделиться
Скачать
Dantel 46502 Скачать руководство пользователя страница 27

46502-0999 <90-00021>

 P

AGE

 27

8.

Press Enter.

9.

The New Name field defaults to the same name as shown in the
Name field. To change the name, type a new one.

NOTE:

When copying a configuration from one location to another, you
do not have to rename the configuration. But if you copy a
configuration from one location to the same location (such as to
use a configuration as the basis for creating a new one), you
must rename the configuration.

10.

Press Enter.

11.

To start the copying process, press Enter.

NOTE:

The configuration files are being copied, not moved; therefore,
the files being copied are not being erased from their original
location.

A

RCHIVE

 F

ILES

Archive Files copies and archives data files from a hard disk to
floppy disks. Archived data cannot be edited or downloaded. You
must restore archived data before you can use it.

NOTE:

You cannot copy multiple GPP system data files to a single
floppy. You must use a separate disk for each GPP system.

M

AKE

 A

RCHIVE

To create an archived file:

1.

Insert a blank diskette into the drive.

2.

Highlight Make Archive.

3.

Press Enter.

GPP SYSTEM DEFINITION

Содержание 46502













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды