Dantel 41096, Руководство по установке и эксплуатации

Страница: 7 / 14

41096-0597 <90-00042> P
AGE
7
2. Set the straps.
Refer to Table B and Fig. 4.
T
ABLE
B - S
TRAP
O
PTIONS
I
NSTALLATION ONTO
E
XISTING
DTSS3A O
RDER
-W
IRE
T
ERMINALS
When a 41096 Panel (option -00) is being installed with existing
DTSS3A order wire terminal(s), the terminal(s) may be mounted
behind the panel or near it. To mount the terminal(s) behind the
panel, mount them to the panel before completing the rack
mounting and wiring.
1. Remove mounting brackets.
Remove the mounting brackets from the order wire terminal(s)
and replace them with the mounting brackets supplied with the
41096 panel. Install the brackets in the flush-mount position on
the front of the order wire terminal(s).
2. Position 41096 Panel mounting brackets.
Position 41096 Panel mounting brackets for the desired mount-
ing (5” projection or flush, for 19” or 23” width). Refer to Fig. 3.
STRAP
CONTROL LIMIT BYPASS
ALL CHAN
Control Limit In
Control Limit Bypassed
CHAN SELECT
Control Limit In
Control Limit Bypassed
POSITION
CTL LMT A IN
CTL LMT A OUT
CTRL LMT B IN
CTRL LMT B OUT
INSTALLATION