Dantel 41096, Руководство по установке и эксплуатации

Страница: 6 / 14

P
AGE
6 41096-0597 <90-00042>
DTSS3A
OPTION - 00
SCREW 4 - 40 X 3/8 TYPICAL FOR MOUNTING
BLANK PANEL
OPTION - 01
OPTION - 03
CHANNEL 1 CHANNEL 1 CHANNEL 1
CHANNEL 2
CHANNEL 3
ALT. POS.
CH. 3
OPTION - 02
CHANNEL 1 CHANNEL 1 CHANNEL 1
CHANNEL 2
CHANNEL 1
INSTALLATION
T
he 41096 Order Wire Control and Speaker Monitor can be
purchased with or without DTSS3A Order Wire terminals
already installed. The 41096 Panel can be installed with existing
DTSS3A Order Wire terminals.
I
NSTALLING WITH
DTSS3A O
RDER
-W
IRE
T
ERMINALS
When the 41096 Panel is purchased with DTSS3A Order Wire
terminals, the 41096 Panel comes with the terminals mounted
and wired to the panel.
1. Mount the assembly in the rack.
Mount the assembly in the rack and connect the appropriate
input and/or output ports on each order wire (see the 00330
DTSS3A and subassembly documentation). Order wire termi-
nals are wired to the 41096 Panel with channel one at the
bottom, channel two above channel one, and channel three
outside the panel (either above or below it). Refer to Fig. 2.
F
IG
. 2 - O
RDER
W
IRE
T
ERMINAL
M
OUNTING
P
OSITIONS
UPDATED