Dante tecnare DAV-4x500, Руководство по эксплуатации

Страница: 32 / 38

32
Device List
w w w . t e c n a r e . c o m DAV-4x500 Amplifier | rev.:1.1
DAV-4x500
7. Device List
Fig 47 Device List
In the figure 47, you will find the number of devices on the connection, the device’s names and the
factory names (the user cannot modify it). If the connection method is TCP, the network IP address of this device will
be displayed in the space to the left of the factory name after connecting. If the connection method is USB, USB is
displayed. If the connection method is a serial port, the specific COM port is displayed.
From left to right are the Mute button, Status refresh button and Remove device button.
The Mute button can directly control the mute of all input and output channels of the entire device. The Status button
refreshes the status of the device instantly. If the device is online, the leftmost position will turn green. The Remove
button removes this device directly in the software.If you need to debug different devices, you can click to select the
target device, and it will update to the function page of that device.
7.1. Add device
Click “File”-”New Device” in the menu bar of the main interface of the software, and the
interface for adding a device as shown in Figure 48 will appear. Select the virtual device
model to be added and add it to the device list. Note: Virtual devices are not connected to
real devices.
7.2. Equipment management
Click “Device”>”Devices” in the menu bar of the main interface of the software, and the device ma -
nagement interface will show, Figure 48.
Fig. 49 Device Management Interface
Fig. 48 Add Device Inter-
face