Dante tecnare DAV-4x500, Руководство по эксплуатации

Страница: 31 / 38

31
Input & Output Interface
w w w . t e c n a r e . c o m DAV-4x500 Amplifier | rev.:1.1
DAV-4x500
The channel group joint tuning situation shows the default 4 channel joint tuning group. When the
background of the corresponding number box turns yellow , it means that this channel has been added to the
second group for joint tuning.
6.2.1. Channel Link
Click the link button , between the input and output channels on the M_Console software
homepage, and will appear the channel link interface as shown in Figure 46.
As shown in the figure 46, the three lists from left to right are
Channel list, Group list, and Parameter list.
The Channel list has listed all the channels that can be tuned.
After selecting the corresponding channels, click the A d d
button to move to the Group list.
There are already two groups in the group list. Select the
corresponding group directly, if you add a channel, it will be
directly divided into the selected group. To remove, select the
channel to be removed, and then click the Remove button
to remove it to the channel list.
The parameter list is a parameter that can be tuned during
group link. Ticking indicates that when one channel in the same group is ad-
justed, the other channels will make the same adjustment at the same time.
Fig. 46 Channel Link
Interface