Dante tecnare DAV-4x500, Руководство по эксплуатации

Страница: 28 / 38

28
Function Module Interface
w w w . t e c n a r e . c o m DAV-4x500 Amplifier | rev.:1.1
DAV-4x500
Select the corresponding preset in the preset list on the left, and then
click the function button on the right to archive, recall, delete, and rename the equalizer
setting parameters.s to test the channel according to your own requirements in the test
signal settings.
5.5. Matrix Mixing
Double-click on the Matrix Mixing module
button, and the matrix mixing setting module will
appear. Figure 40.
In the figure 40, Out 1, Out 2, Out 3 & Out 4 on
the left correspond to the output channel, In A, In
B, In C & In D correspond to the input channel,
and the value box with a value on the right is the
input and output channel mixing key. When the mixing
key is on (double-click to switch the state), this input
channel and output channel signals realize the mixing
function.
The right part contains the gain, reset button, and clear button of the matrix mix, click the
value box on the left, and then drag the slider of the matrix mix gain or enter a value in the value box to adjust the
Gain value. Clicking the reset button will reset the matrix mixing function to the initial one-to-one state. Clicking the
Clear button will clear all the matrix mixing functions, and there is no corresponding relationship between the input
and output of the device.
5.6. Output Equalizer
Double-click on the module button and will appear the module interface of the input equalizer
setting module shown in Figure 36. The functions and operation methods are the same as those of the inputs equa-
lizer.
5.7. Output Delay
Double-click on the Delay module button will appear the module interface of Figure 42 Input
Delay Setting Module.
As shown in Figure 39, the delay control content of all input /
output channels is listed. Drag the slider to intuitively adjust the delay value of
the corresponding channel, or enter the corresponding value in the value box .
This is the switch of the delay function. Red is off and
Green is on. The reset button can directly reset the default value of the channel
delay.
Fig. 40 Matrix Mixing set-
ting module
Fig 39. EQ Preset list
module
Fig 41. Input Delay Setting
Module