Dante DNA2000 Series, Инструкция по установке и эксплуатации, Страница: 73 / 200

Figure 5-67
Here user can set a multiple cast group. Please refer to the following sheet for detailed
information.
IP multiple cast group address
-224.0.0.0-239.255.255.255
-“D” address space
The higher four-bit of the first byte=”1110”
Reserved local multiple cast group address
-224.0.0.0-224.0.0.255
-TTL=1 When sending out telegraph
-For example
224.0.0.1 All systems in the sub-net
224.0.0.2 All routers in the sub-net
224.0.0.4 DVMRP router
224.0.0.5 OSPF router
224.0.0.13 PIMv2 router
Administrative scoped addressees
-239.0.0.0-239.255.255.255
-Private address space
Like the single broadcast address of RFC1918
May not be used in Internet transmission
Used for multiple cast broadcast in limited space.
Except the above mentioned addresses of special meaning, user can use other addresses. For
example:
Multiple cast IP: 235.8.8.36
Multiple cast PORT: 3666.
After user set multicast function on the local-end and then logged in the Web, the Web can
automatically get multiple cast address and add it to the multiple cast groups. User can enable
real-time monitor function to view the view.
Please note multiple cast function applies to special series only.
5.10.2.4 PPPoE
After user enable PPPoE server, user can set start IP address and total IP address to limit the
PPPoE client-end allocation IP address range.
PPPoE interface is shown as in Figure 5-68.
a) Input “PPPoE name” and “PPPoE password” user get from user ISP (Internet service
provider). Click save button, user need to restart to activate user configuration.