Dante DNA2000 Series, Инструкция по установке и эксплуатации, Страница: 40 / 200

Figure 5-23
Select Pan/Tilt/Zoom, the PTZ setup is shown as in Figure 5-24.
Please note the commend name is grey once device does not support this function.
Double click the title to hide the PTZ menu interface.
Here user can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan, pattern aux
function, light and wiper, rotation and etc.
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The speed 8 is faster
than speed 1. User can use the remote control to click the small keyboard to set.
User can click and of the zoom, focus and iris to zoom in/out, definition and brightness.
The PTZ rotation supports 8 directions.
Figure 5-24
In the middle of the eight direction arrows, there is a 3D intelligent positioning key. See Figure
5-25.
X
Please make sure user protocol supports this function and user need to use mouse to
control.
Click this key, system goes back to the single screen mode. Drag the mouse in the screen to
adjust section size. The dragged zone supports 4X to 16X speeds. Drag the mouse from top to
the bottom to zoom in. Drag the mouse from bottom to up to zoom out. It can realize PTZ
automatically. The smaller zone user dragged, the higher the speed.
Figure 5-25
Here is a sheet for user reference.
Name Function
key
function Function
key
function
Zoom Near Far