Dante DNA1425T Скачать руководство пользователя страница 80 | Manualshive

Страница: 80 / 124

Dante DNA1425T Скачать руководство пользователя страница 80

Parameter

Note

Enable

Check it to enable scene change function.

Working

Period

It is to set the alarm period, it can enable alarm event only in the set time range.
There are six periods every day for setup and user must check box in front of

each period to enable it.

Select days (Sunday by default, if select all the week, then it means applying

the setup into the whole week; user may also check the box in front of the day
and make setting for some days separately).

Click “OK” button after completing setup, go back to motion detect setting page,

click “OK” button to finish working period setup of motion detect

Note: Period setup can be done by dragging mouse while not releasing left mouse.

Record

Check it and so when alarm occurs, system will auto record. User shall set record
period in Storage>Schedule and select auto record in record control interface.

Record Delay

System can delay the alarm record for specified time after alarm ended. The value
ranges from 10s to 300s.

Figure 5-34

58

«
...
78
79
80
81
82
...
»

Содержание DNA1425T





























































































































Отзывы:

Нет отзывов