Dante DNA1425T Скачать руководство пользователя страница 12

Страница: 12 / 124

2 Device Installation

2.1 Install Device

The device can adopt wall mount installation and pendant installation

Please follow the steps listed below to install the device. Please refer to Figure 2-1 for reference.

Figure 2-1

Warning:

The installation surface must min sustain the 3X weight of camera to prevent it from falling.

Please avoid the device, part, tool and etc. falling during installation in case it will damage the

device, lack parts and injure passers-by and other objects.

Step 1

Select a smooth installation surface (wall or ceiling and etc.), and make sure the installation

surface can sustain the weight of the device, then stick the installation position map on the

proper location according to the requirements.

Step 2

Dig holes according to the four installation holes marked on the installation position map, pay

attention that the pore size and depth have to be matched with expansion bolts, the deviation of

pore size is not allowed.

Step 3

Open the accessories bag and take out the expansion screws, then insert the expansion screw

into the hole you just dug with a hammer, keep the outer end and the installation surface parallel.

Содержание DNA1425T





























































































































Результаты поиска

Содержание DNA1425T

Отзывы:

Dante DNA1425T, Инструкция по установке и эксплуатации, Страница: 12 / 124

Результаты поиска

Содержание DNA1425T

Отзывы: