Dante DNA1425T Скачать руководство пользователя страница 31

Страница: 31 / 124

Parameter

Function

Video
setup

It is to adjust monitor video
brightness.

Note:

All the operations here apply

to WEB end only.

Please go to Setup-

>Camera->Conditions to
adjust corresponding items.

It is to adjust monitor video
contrast.

It is to adjust monitor video
hue.

It is to adjust monitor video
saturation.

Reset

Restore brightness,
contrast saturation and

hue to system default setup.

Click this button to display/hide image control interface. Click it to open picture setup interface. This
interface is on the top right pane.

Please refer to the following sheet for detailed information.

2.4.2 Original Size

Click this button to go to original size. It is to display the actual size of the video stream. It depends on

the resolution of the bit stream.

2.4.3 Full Screen

Click it to go to full-screen mode. Double click the mouse or click the Esc button to exit the full screen.

2.4.4 Width and Height Ratio

Click it to restore original ratio or suitable window.

2.4.5 Fluency Adjustment

There are three levels of fluency for user to select (real-time, normal, fluent). The default is normal.

2.4.6 Rules Info

Click it to enable preview page to display intelligent rules, the default is on.

Note:

The function is only supported by some devices.

2.4.7 Realtime Report

Содержание DNA1425T





























































































































Результаты поиска

Содержание DNA1425T

Отзывы:

Dante DNA1425T, Инструкция по установке и эксплуатации, Страница: 31 / 124

Результаты поиска

Содержание DNA1425T

Отзывы: