Dante DNA1425T, Инструкция по установке и эксплуатации, Страница: 63 / 124

Parameter Function
SMTP Server
Input server address and then enable this function.
Port Default value is 25. User may modify it if necessary.
Anonymity For the server supports the anonymity function. User may auto
login anonymously. User do not need to input the user name,
password and the sender information.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
User may select SSL, TLS or none.
Title (Subject)
Input email subject here.
Attachment
System can send out the email of the snapshot picture once
user check the box here.
Mail receiver
Input receiver email address here. Max three addresses.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormity event activates the email, system sends out the
email according to the interval user specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Health mail
enable
Please check the box here to enable this function.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save
the email setup information.
Figure 5-18
Please refer to the following sheet for detailed information.
5.2.7 UPnP
It allows user to establish the mapping relationship between the LAN and the public network.
Here user may also add, modify or remove UPnP item. For UPnP on different routers, user must disable
UPnP function. See Figure 5-19.
41